STREAMFEEDER  1500, 2700, 3700              (see current stock for availability)

Reliant 1500  Friction Feeder (up to A5) easily moved, easily set up, will feed almost anything !

 

Features
  • Ideal for Phillipsburg, Mailcrafter, Kern and similar type swing-arm inserters
  • Provides exact sheet separation and singulation
  • Compact 10" (25.40 cm) width allows side-by-side mounting
  • Feeds up to 10,000 pieces per hour
  • Brushless and clutch-free high speed motor for dependable, trouble-free operation
  • Handles most insert types, sizes, and thicknesses
  • Single knob adjustment makes setup fast and easy
  • 24" (60.96 cm) capacity hopper is easily loaded from front or back of inserter
  • Sealed precision bearings never require lubrication 
  • Will feed open edge first (e.g. 'Z'-folds, cheque books, side folds)
  • Easily moved from stn. to stn. or machine to machine 

Maximum Insert Size:

9 1/4" W x 6" L (23.5 cm x 15.24 cm)

Minimum Insert Size:

2 1/8" W x 2 1/2" L (5.40 cm x 6.35 cm)

Thickness Range:

.002" to .250" (.05 mm to 6.35 mm)

Insert Types :

Z-folds, gatefolds, payment booklets, coated and slick stocks, overwrapped products, and standard products when greater capacity is needed

Speed:

maximum 10,000 pieces per hour

Hopper Capacity:

24" (60.96 cm)

Power Input/current:

single phase/1 amp

Sensors:

Diffuse reflective

Overall Dimensions:

11 3/8" L (28.89 cm)
10" W (25.40 cm)
25 1/8" H (63.82 cm)

Weight:

Approx. 23 lb. (10.41 kg)

Certification:

CE

Reliant V-710DM  DUAL Friction Feeder  (up to A4+)

Features

  • Presentation mode for Bell & Howell Phillipsburg/PostStar, Mailcrafter and similar swing-arm type inserters AND Continuous mode for Cheshire, Kirk Rudy, Buskro and Bryce 16K ink jet printing/labeling bases.  Switchable between presentation mode and continuous feed (for inkjets)

  • 10,000 piece/hour speed on gripper arm inserters (product dependent)

  • Up to 25,000 piece/hour speed on inkjets etc. (product dependent)

  • Provides exact sheet separation and singulation

  • 24" (60.96 cm) capacity hopper with two-knob width adjustment

  • Tool-free adjustments for fast setups and changeovers

  • Built for rugged continuous use with quality precision parts

  • No-slip feet allows for quick and simple base mounting 

  • Variable speed control for synchronous operation

  • Operator safety guards over discharge and feed belts  

 

Maximum Material Size:

12 1/4" W x 14" L (31.11cm x 35.56cm)

Minimum Material Size:

3 3/4" W x 3 3/4" L (9.53cm x 9.53cm)

               Optional:

2" W x 2 1/2" L (5.08 cm x 6.35 cm)

Thickness Range:

.003" to .750" (.07mm to 19.05mm)

               Optional:

.002" to 1" (.05 mm to 25.4 mm)

Printing/Labeling Productivity:

Up to 25,000hour (inkjet)

Inserter Productivity:

10,000/hour (product dependant)

Belt Speed:

9,000"/min. (228.59 m/min.)

Hopper Capacity:

24" (60.96 cm)

Power/current

single phase/3 amps

Sensors:

Diffuse reflective

Switches & Controls:

Power On/Off, variable speed control, reset, fault light

Run Delay:

Selectable (0-15 sec; 1.0 sec increments)

Ramp Delay:

Selectable (0-5 sec; .5 sec increments)

Overall Dimensions:

21"L (53.34 cm) x 13 1/4"W (33.66 cm) x 26 1/2"H  

Weight:

59 lb. (26.69 kg)

Certification:

CE

 

RELIANT 3700 (up to A4+) - for picture see V-710DM

Details as per V-710DM  (except max. speed 3,600 items/hour) but designed for operation with  POLYWRAP or SHRINKWRAP lines.

 

(if the left hand site navigation panel or top banner is not visible click here - homepage)